Archives 2008

The @girlkawasaki effect! How to get Hundreds of Twitter followers with little work on your part

What is the @girlkawasaki effect? How does this work, and how can it work for you?

Let me first off by telling you that @girlkawasaki is a very real person who has a very real blog.  They’re a very good friend of mine and are fortunate to have been an influence of the first draft of this (Originally it could have been the @cxi effect, but that’d be lame and the fruits of my labors resulted in the direct effect to apply to @girlkawasaki :))

So, WTF is this?!? – Alright, I’ll tell you!

While studying the way Twitter works, and more importantly how other people on Twitter work, I began to analyze some trends and patterns of likely events.  I personally love conversation on all topics, so I would follow people of all backgrounds on twitter.  When someone re-tweets someone else on something interesting, I follow them as well, continuously spreading the love of knowledge whether me sharing or simply learning from others experiences.

I noticed that when you add some people, you may get an immediate follow-back, and more often than not an Auto-DM (Direct Message).  A lot of people find these Auto-DM’s to be a bit annoying.  I simply find them to be rather insincere and only a little annoying. ;) I do like them because Auto-DM’s typically give rise to the fact that you’re using a 3rd party service like SocialToo or others which auto-sends that, and often Auto-follows on your behalf :)

So if you have a boatload of followers like I do (Hey I’m no @guykawasaki) But I do have a fair number of followers, many of which happen to reside in my own industrie(s) You’ll tend to find that by following a lot of people, a lot of people will often follow you back.

So in that first test, @girlkawasaki wanted followers for the same reasons I do (People to learn and share with) so she followed a bunch of the people I (@cxi) happen to have been following and a number of them ~half followed her back.  And this trend would carry on for some time, of people following her either directly (a response to being followed) or randomly based upon tweets, comments and interaction.

So the next phase of this, once @girlkawasaki was seen to have a comfortable following of stable tweets, I then tried to follow everyone (minus spammers and locked accounts) that happened to be *Following* her ~650 people were following @girlkawasaki which were then followed.

This is where it gets interesting.  You might think “I’ll get a mass of followers instantly!”  But that isn’t true and isn’t the case, because people use different services which have large databases with different scrubbing and updating routines.   The result turns out to be that after the first hour of following ~650 people,  ~130 twitter accounts followed back.

This is after the first hour ofcourse, and after several hours we’ll see how the numbers reflect.    I’m not saying you’re guaranteed to get hundreds of followers if you follow everyone who is following @girlkawasaki, however after one full day I’ll update this to include what the final number looks like.    The account I used in this test is indeed an actual real twitter account so these are real live and valid numbers to be working with. :)

This is not a test of a Denial of Service, more of an interest of parties out there (like me) who want to follow more people and want more followers so we can continue our conversation in life, in Tweetdom and most importantly with ourselves :)

This is no disrespect to anyone who follows @girlkawasaki and are interesting in what she tweets (both actual tweets and her wonderful blog posts :)) Just think how many followers you get by consequence when you don’t fall into that small criteria of auto-followers :)

Thanks, and don’t hesitate to ask any questions or leave any comments on your success! :)

Control Group: 373 followers in 17hrs, for 56% followback!

When that’s out of 650 that’s pretty amazing!

Google Apps Standard Edition (A present for Sarah)

It’s been asked – Hey what kind of features do you get when you use Google Apps in the Standard Edition?

image

For those of who you use Google Apps will realize it is free, so you can host your email (as I do) and have the rest of the apps controlled and assigned out there for the huge cost of $0.00

Let’s take a look at a few of the distinctive features.

image 

By the looks of it, I have Webpages (I don’t use) Start Pages (Don’t use!) Email (Do use!) Chat (Use while in Email) Calendar (Don’t use) and Sites also not being used.

One cool feature of User Accounts is Contact Sharing!

image

A cool specific features for the Domain Settings happen to be some granular control, one feature of which Sarah was interested in knowing!

Automatically enforce Secure Socket Layer (SSL) connections when your users access Gmail, Calendar, Docs, and Sites

Another cool bit is Service Setting does allow you granular control over each of your Services that you have available.   But those few things aside, this was just an extremely high level look at the Free offerings that Google has as part of Standard Edition

NetApp Premium AutoSupport Detailed Health Check

Hooray! It is now time to drill into the Health Summary and Detailed Health check!

For those who remember the last Dashboard snapshot, we had a number of warnings and notices on this filer!

NetApp Premium AutoSupport

So, we’re going to drill down into the 12 warnings and 6 notices!

NetApp Detailed Health Check

The Health Check Details will provide you with a number of “sections” which will provide a number of bits of information (You may have one or more of the areas I’ll be quoting out)

It all starts with the Health Check Analysis:

Health Check AnalysisVery basic, straight forward and provides you with a timeline of what the recommendations are based upon.  This can be especially useful if you say “I fixed that!” you know when its referencing so as to not freak out!

Next comes System Level Warnings:

System Level Warnings

You’ll need to zoom in to see what kind of cool stuff there is, but I’ll zoom in for you in some areas I want to make sure you recognize.

System Specific Message

That little bad boy there, oh my god, so cool if you happen to want to actually find out Why there is an error instead of knowing there is one.

So, if we click on that lun.offline message to figure out “WTF” is going on, we get this!

Corrective Action! 

For simplicity sake, it showed us the exact error in the logs, showed us an indication as to why this happens and provides corrective actions on what to do!

 

There are other better examples of corrective actions (such as replace disk, unmap/remap luns, collect a trace) and so on and so forth to help you not only manage your system better, but come to better terms with the ‘warnings’ of your systems so you can be in better command and control of your own operations.

Next up is System Level Notices:

System Level Notices

This is cool because it tells you something outright, and then provides you a link to a Bug Report on it, so you can follow the status especially if it applies to you!

Now this is cool as well, Volume Related Notices:

Volume Related Notices

Note the disclaimer: These are based on conservative guidelines and may or may not be applicable to this system, but you should definitely know about it if you weren’t aware!

What I like about this, is it calls out specific volumes and discusses their snapshot usage, snapshot reserve and snapshot schedules (3 areas I find often accidently configured wrong and a hotbed of areas to clean up!)

And last but not least, another favorite area, Summary of Disks requiring Firmware Upgrade:

Summary of Disks Requiring Firmware Upgrade

I personally hate playing guessing games of “Hmm, are my disks on the right rev? Do I need to upgrade?” etc, etc, etc… that same old story.  No matter how many types or different disks you have in the system, this Health Check will tell you the skinny.  

The only thing which would make this cooler, is Shelf Firmware Upgrade:

(I had to go to another filer to get this screen capture, because all these filers are current ;))

Shelf Firmware Upgrade

One of my favorite parts of this Health Check tool is that after I’ve upgraded and updated a system and I want to feel all warm and fuzzy about the work, I’ll go look at these details and make sure I’m not seeing warnings, notices, backrevved disks or modules, etc.

This not only saves me and my customers time and money at that moment, it also pays off dividends in the long-term.  Less work to be done to manage and maintain, less chance for unknown downtime because you know the EXACT state of your system at any given point.

The Premium AutoSupport toolset (This being just one part of it) opens the door to allowing you to not only self manage, but self-control and I’ll tell you – any system I’ve felt comfortable and confident in after building it, has never gone down.

It’s not magic, a special arcane craft or art form.   It’s clear conscious best practices and using the tools available to you, an ounce of prevention is worth an hour of downtime! :)

Hopefully you’ve enjoyed this segment, I’ll be hitting up Visualizations next so look forward to my delivery of that!

Disclaimer: The information above reflects only some of the type of notices you can receive.  If you do not see any of these notices on your system that is great! If you encounter additional ones (Aggregate Level Notices, Volume Related Warnings, etc) it is not a problem just an education of the current health of that particular system and should be reviewed.

NetApp Premium AutoSupport High Level Overview

Let me first off tell you how excited I am to be able to share this with you!

I think “OMFG” can easily classify the type of excitement I have for this tool, the simplicity it will introduce into your life, and more.    I can honestly tell you, that without this tool a lot of the things I do on a regular basis would take a lot longer, so if you know anything about me, it is that I like simplicity with reason, efficiency and getting the most out of my resources.

For those of who you think “You can’t get excited over a tool, especially one involving storage” Well wait and see, because you’ll be drooling along with me! ;)

This is part 1 of an almost endless series because there will be more things coming out of this, that and I don’t want to create one massive difficult to read posting on Premium AutoSupport.

So, let’s get started!

All things begin with the NOW Page – So go ahead and login to now.netapp.com

NetApp On Web - NOW Support Site

 

Once you’ve logged in, you will see a section titled:

My Netapp Products

Within that section “My AutoSupport” it’s easy to see with the yellow “NEW!” – Go ahead and click on that and you will be ready to start taking advantage of Premium AutoSupport!

 

My AutoSupportHere it is zoomed up a bit so you can see what I’m talking about!

Alright, we’ve clicked in (Yes, this is very basic tutorial for now, I’ll get into the guts soon!)

View time line based events, health check recommendations, performance trends, site configuration summary, device configuration details, reference configuration comparisons, ONTAP upgrade advising, and AutoSupport message history for your NetApp systems.

 

Alright, you’ve gotten this far! Wow, there are some cool things on this page, which are often overlooked.   I’d like to point those out, just so I’ve done my civic duty!

 

This version of Premium AutoSupport only supports NetApp FAS, F-series, V-Series and NearStore storage appliances. Okay, here is the disclaimer text.   Browser Support lists IE 6,7 –  Firefox 1, 2, 3 (With SVG) And it cites that Apple Safari is not supported.   For the purposes of all of my screenshots I AM actually using Internet Explorer, however I exclusively use Chrome 99% of the time.   I’ll mention what works and doesn’t work across browsers, the IE and FF experience are absolutely great but you won’t be crippled if you’re not using them – You just won’t get as Rich of an experience.   And the facts behind that are, sometimes you won’t want the rich experience when doing some specific nitty gritty things.   So don’t fret over browsers there is much support!

imageAnother cool thing, which is a great supplement to this, is the WebEx Tutorials and Flash Demos!  Oh, and the iPod contest it mentions, which takes you to a Tech On Tap article from May of 2008.   If you’re seeing this post and not that one, it’s because it’s honestly hard to find anything from those, it’s a great article though by Jay Mistry! (FYI: The screenshots in the TOT Article do not reflect the way Premium AutoSupport looks today. :))

A brief quote from that article:

Now, Premium AutoSupport’s Upgrade Advisor tool does all the hard work for me, saving me four to five hours of work per storage system and providing an upgrade plan that’s complete and easy to follow. The tool works for both standalone systems and clusters and supports all Data ONTAP releases since 6.3. Among the things that it checks for are:

  • Known upgrade issues
  • Required firmware revisions
  • Applicable field alerts
  • Software license issues
  • Version compatibility of dependent  software products (SnapDrive®, etc.)

Another advantage of the Upgrade Advisor is that it gives us a complete plan to back out each upgrade should a problem arise. We’ve never had to use such a plan, but new regulations in the finance industry are starting to mandate this capability, so it’s nice to have it covered.

I mention this now, because I didn’t even plan to tap on Upgrade Advisor until much later ;) But nonetheless, we’re almost there! It’s time to click the “Premium Autosupport” link!

And this is the part where I stop, and take you directly to the dashboard of one of my demo systems!   You likely will be presented with a list of systems you manage, so select one and you’re ready to rock and roll!

NetApp Premium AutoSupportCertain sections have been blocked out, in order to protect my still having a job! ;)

However I’ll go into depth of each of these sections which are hard to read, how they can benefit you and a number of other cool things… In the next post :)

At the high level, the key sections I’d like to mention here which I’ll go into depth are:

…and more as I can :)

I did try to order them in the order I intend to deliver them, so if they don’t come out in that order, we’ll deal with that.   Nonetheless, this is the end of this high-level overview, hopefully you’ve learned a bit more about the Premium AutoSupport from this alone (Like its existence) and you’ll be on your way to ensuring a more simplified storage management experience.

I know once you start using these things you’ll be saying “OMFG” too. :)

Psst, see the Performance section? There’s a lot more in there as well, soooo super cool! I’ll try to get these other ones out there as soon as possible so you can benefit the same way I personally do with the magical mysterious things I do! :)

How do I fix the Tweetdeck API issue with Twitter?

First of all, this is not an issue with Tweetdeck, this is an issue with Twitter!

How I personally handle this issue (And I haven’t hit an API limitation using just Tweetdeck)

Is go in and modify the API values to look like this:

image

 

As you can see, the major difference is the “All Friends” has been increased from 1min to 1min 12s.

That minor difference alone is easily enough to make up for the API limits on an hourly basis.

If you continue to run out of API calls in an hour, increase that number to 2 minutes or beyond.

 

 

 

While you’re at it, upgrade to Tweetdeck 0.21 Beta released: Christmas Eve!

Read More